| Size: 296 Comment:  | Size: 1550 Comment:  | 
| Deletions are marked like this. | Additions are marked like this. | 
| Line 8: | Line 8: | 
| {{{#!python from pyhdf import SD from pylab import * from mpl_toolkits.basemap import Basemap fid=SD.SD('AIRS.2003.03.30.L3.RetStd001.v5.0.14.0.G07215021620.hdf') T=fid.select('Temperature_A') Temp=T.get() #Bild imshow(Temp[0,0:90,130:180],vmin=170,vmax=300) colorbar() #Basemap m = Basemap(projection='ortho',lon_0=0.0,lat_0=75.0,resolution='l') m.bluemarble() #PLOTBEFEHL FEHLT NOCH - Drucklevels auslesen}}} Drucklevel: ||Index of T||TempPresLvls|| || Levels || in mb of T Levels || || 1 || 1000.0|| || 2 || 925.0|| || 3 || 850.0|| || 4 || 700.0|| || 5 || 600.0|| || 6 || 500.0|| || 7 || 400.0|| || 8 || 300.0|| || 9 || 250.0|| || 10 || 200.0|| || 11 || 150.0|| || 12 || 100.0|| || 13 || 70.0|| || 14 || 50.0|| || 15 || 30.0|| || 16 || 20.0|| || 17 || 15.0|| || 18 || 10.0|| || 19 || 7.0|| || 20 || 5.0|| || 21 || 3.0|| || 22 || 2.0|| || 23 || 1.5|| || 24 || 1|| == Notizen == | 
Temperaturprofile: AIRS
Hilfreiche Links:
   1 from pyhdf import SD
   2 from pylab import *
   3 from mpl_toolkits.basemap import Basemap
   4 
   5 fid=SD.SD('AIRS.2003.03.30.L3.RetStd001.v5.0.14.0.G07215021620.hdf')
   6 T=fid.select('Temperature_A')
   7 Temp=T.get()
   8 
   9 #Bild
  10 imshow(Temp[0,0:90,130:180],vmin=170,vmax=300)
  11 colorbar()
  12 
  13 #Basemap
  14 m = Basemap(projection='ortho',lon_0=0.0,lat_0=75.0,resolution='l')
  15 m.bluemarble()
  16 
  17 #PLOTBEFEHL FEHLT NOCH - Drucklevels auslesen
Drucklevel:
| Index of T | |
| Levels | in mb of T Levels | 
| 1 | 1000.0 | 
| 2 | 925.0 | 
| 3 | 850.0 | 
| 4 | 700.0 | 
| 5 | 600.0 | 
| 6 | 500.0 | 
| 7 | 400.0 | 
| 8 | 300.0 | 
| 9 | 250.0 | 
| 10 | 200.0 | 
| 11 | 150.0 | 
| 12 | 100.0 | 
| 13 | 70.0 | 
| 14 | 50.0 | 
| 15 | 30.0 | 
| 16 | 20.0 | 
| 17 | 15.0 | 
| 18 | 10.0 | 
| 19 | 7.0 | 
| 20 | 5.0 | 
| 21 | 3.0 | 
| 22 | 2.0 | 
| 23 | 1.5 | 
| 24 | 1 | 
